What are the advantages of fiber laser cutting machines?

Fiber laser cutting machine is a high-precision cutting equipment that uses fiber lasers as the cutting source to cut materials such as metals. Its main advantages include high speed, high precision, low cost, and low maintenance.

I. High speed

The laser beam generated by the fiber laser has a high energy density and can quickly cut materials such as metals. Compared with traditional mechanical cutting methods, the cutting speed of fiber laser cutting machines is faster, which can greatly improve production efficiency. In addition, fiber lasers can work continuously without the need to stop and change tools, further improving production efficiency.

II. High precision

The laser beam of the fiber laser cutting machine can form a very small cutting area after focusing, making the cutting lines more delicate and the cutting precision higher. At the same time, the output stability of the fiber laser is also very good, which can ensure the stability and consistency of cutting quality.

III. Low cost

Compared with traditional mechanical cutting methods, fiber laser cutting machines have lower costs. They do not require a lot of manual intervention or frequent replacement of consumables such as cutting tools, which can greatly reduce production costs. In addition, the fiber laser has a long service life and low maintenance costs.

IV. Low maintenance

Because the fiber laser cutting machine uses a non-contact cutting method, unlike traditional mechanical cutting methods, it does not wear out consumables such as cutting tools, and the maintenance costs are relatively low. In addition, the service life of fiber lasers is longer and they do not need to be replaced frequently.

3015-F-重型银绿

This machine is our recently best-selling 3015 fiber laser cutting machine, which combines the advantages of fast speed, smooth cutting, low maintenance cost, and high precision of fiber laser machines. It has become one of the most popular products in our company.

Please check the product parameter:

Model UL-3015F
Cutting Area 3000*1500mm
Laser Power 1000w, 2000w, 3000w, 4000w, 6000w, 120000w
Laser Type Raycus fiber laser source(IPG/MAX for option)
Cutting Speed 0-40000mm/min
Max Travelling Speed 120m/min,Acc=1.2G
Power Supply 380v, 50hz/60hz, 50A
Laser Wave Length 1064nm
Minimum Line Width 0.02mm
Rack System made in Germany
Chain System Igus made in Germany
Graphic Format Support AI,PLT,DXF,BMP,DST,IGES
Driving System Japanese Fuji Servo motor
Working Table Sawtooth
Auxiliary Gas Oxygen, nitrogen, air
Cooling Mode Water cooling and protection system
Optional Spare Parts rotary system
Machine Weight 2000-3000kgs

 

样品图

Post time: Apr-10-2023

Connect US

Give Us A Shout
Get Email Updates